How to Build a Fence

 

In this article, we have a presentation of how simple and fast it is to build a barbed wire, electrical wire or chain link fence. Barbed wire is the easiest and most economical. It does not require any electricity or special equipment. You begin by pounding wood or metal or fence posts typically every 8 feet. On each finish of the fence you pound 2 posts 3 feet separated and later nail a post on a slanting beginning at the highest point of the end and fastening to the bottom of the second last post. It then stops the last post from bending when the wire is tightened.

Then roll out the wire usually 3 or 4 strands depending on what will be inside the fence. Tighten the wire and staple it evenly spaced to the posts. How to build wire fence? Electrical wire is the fastest fence to build although requires an electric fencer to create electric shock. Generally insulated posts are used that way the wire does not have a path to ground. The posts are pushed in and one or two wires are rolled out and clipped in the slots in the posts. Tightened and hooked to an electrical source creates a quick means of containing animals.

Chain link fences are more difficult to build. To begin with you pound or bore the metal posts in the ground all to a similar tallness. At that point reveal the wire and attach wire it to the posts. Tops are put on the posts and also sections to hold a best rail which is connected to the highest point of the wire. All three methods of fencing can easily be done, once you decide which type best suits your situation and a little bit of figuring you will have no trouble how to build wire fence. Fence Company